Skip to content
STAK/ POLES · 001 / 2026
STAK / POLES · BATCH 001 / 2026PRE-REGISTRATION OPEN

A pole built for pace.

Swedish design. T700 core. 055 g/m. Batch 001 launches spring 2026. Pre-registered athletes get to buy first.

SWING WEIGHT
055g/m
T700 CORE · 12K WEAVE
01/ THESIS

A carbon fiber pole is a tool. We treat it like one.

No logo tax. No retail markup. Specs you can verify and a series that is numbered from start to finish.

02/ METRICS

Four metrics. No claims.

Everything we say is measurable. Everything we measure is published.

SWING WEIGHT
055g/m
T700 / T800 CORE · 12K WEAVE
SHAFT LENGTH
130–170 cm
10 CM INCREMENTS · 5 LENGTHS
BALANCE POINT
068%
FROM TIP · REFERENCE 001
BATCH
001/ 2026
FIRST SERIES · SWEDEN
03/ SYSTEM

STAK / POLES — 001

STAK carbon fiber pole with 12K weave surface.
REF · 001 / 2026 · UMEÅ

Racing shaft in T700 / T800 core with a 12K weave surface. Exchangeable grip and basket.

TECHNICAL SPEC
MATERIAL
T700 / T800 CARBON
SURFACE
12K WEAVE · MATTE LACQUER
SWING WEIGHT
055 g/m
SHAFT LENGTHS
130 / 140 / 150 / 160 / 170 cm
GRIP SIZE
S · M · L · XL — EXCHANGEABLE
BASKET
30 / 40 / 50 / 60 mm — QUICK FIT
TIP
TUNGSTEN CARBIDE · 60° CONE
PRICE
€139
VAT INCL. · FREE SHIPPING EU
BUY FIRST
SWING WEIGHT
055g/m
T700 / T800 · 12K WEAVE
DELIVERY
Q2/ 2026
DIRECT TO ATHLETE
05/ MANIFESTO

Nordic performance. No overstatement.

PULL QUOTE

We don't sell a lifestyle. We sell a tool with a spec you can read in three minutes and verify in ten.

STAK was founded in 2026 in Hedemora, Sweden, by a former national team skier and two engineers. We started from a simple observation: there is no technical reason a racing pole should cost €400 — and no aesthetic reason it should look like a graphic explosion.

We sell direct from our own website with no retail layer. That's how we keep a T700-based racing pole under €140 without cutting the spec.

Every series gets an open product log: specification, tolerances, deviations. If something doesn't hold up — tell us. Support is handled by us, not an outsourced call center.

— STAK, Hedemora 2026
06/ FLOW

From spec to delivery.

We design in Sweden, lock the spec, verify every series against reference, and ship direct to athletes. No middlemen between.

  1. 01/ STEG
    SPEC

    CAD, lay-up plan, and geometry are developed in Sweden with reference athletes. Locked before the first prototype.

  2. 02/ STEG
    PROTOTYPE

    Prototypes are built to the locked spec and verified against a reference load profile before the series is ordered.

  3. 03/ STEG
    SERIES

    Batch 001 is produced to the same spec. Every series gets its own production log, delivered with the shafts.

  4. 04/ STEG
    DELIVERY

    Direct from Hedemora to the athlete. No retailer, no markup in the middle.

07/ FAQ

Technical questions, honest answers.

Missing an answer: write to support@stakhq.com. We reply ourselves.

  • 01Why 055 g/m swing weight?

    It's the point where the T700/T800 lay-up holds up for both racing and everyday training. Pushing further down requires thinner walls and reduced structural integrity — we prioritise durability over the paper weight.

  • 02How do I pick the right length?

    General guide: 0.90 × body height for classic, 0.89 for skate. If torn between two: pick shorter if you are technique-oriented, longer if you are power-oriented. Full guide is published before delivery.

  • 03Why does the pole cost €139?

    We sell direct from our own website with no retail layer. No 40–50 % retail markup the way traditional sports shops operate — that margin goes back to the athlete.

  • 04How large is Batch 001?

    Batch 001 is a limited first series. The exact unit count is published before the batch opens for purchase. Pre-registered athletes get to buy first, before the public launch.

  • 05What happens if the pole breaks under warranty?

    One-year full warranty against material or manufacturing defects. Breakage from falls is not covered — but we offer replacement shafts at cost for Batch 001 owners.

  • 06Can I swap grips and baskets myself?

    Yes. Grip and basket are mechanical joints without glue. Swap takes under 30 seconds and requires no heat. Replacement parts are sold separately.

  • 07Where are the poles manufactured?

    The design and specification are Swedish. Manufacturing is done to the locked spec at a specialised composite partner. Every series is verified against a reference measurement before delivery.

  • 08How are the poles packed and shipped?

    Each pair ships in a 170 cm tube with reinforced end caps. No plastic bags, no marketing inserts. Shipping within the EU via PostNord Business, 2–5 days.

08/ PRE-REGISTRATION

Buy Batch 001 first.

Batch 001 is the first series STAK is launching — spring 2026. Pre-registered athletes receive a purchase link before the public launch. No other emails, no marketing.

GDPR · STAK AB · Hedemora, SE · support@stakhq.com

PROTOCOL
  1. 01 / PROTOCOL
    REGISTER

    You enter email and country. No payment, no commitment.

  2. 02 / PROTOCOL
    PURCHASE LINK

    We send a personal link to your inbox before Batch 001 opens publicly.

  3. 03 / PROTOCOL
    BUY

    Complete the purchase via the link before others get the chance. No prepayment.